Position Control Servo Motor Kit for Robot & CNC

Position Control Servo Motor Kit for Robot & CNC

 Position Handle Servo Motor Kit For Robotic & cnc

57IV90/57IV130/57IV180 Attributes
1.Operating voltage: DC input voltage 15VDC to 50VDC ,advise voltage is 36V
2.The max constant output recent is 10A, the max peak recent is 22A (three times overload potential) 
three.Suitable differential or single-finished pulse / path command, have three manage method of position, speed and torqe
4.Employing FOC magnetic place management technological innovation and place vector pulse width modulation (SVPWM) closed-loop control technologies
five.The number of pulses per cycle (subdivision) can be established by the debug application or the dial switch location(digital equipment ratio)
six.Have 3 varieties of 90w,130w and 180w DC brushless servo motor to select.
seven.Have safety of overvoltage, undervoltage, overcurrent and tolerance,and so forth.
8.One / double pulse manner, the pulse valid edge can be select.
nine.The max pulse frequency of manage instruction is 500KHz (manufacturing facility default is 200KHz)
ten.Pulse, path and permit signal input interface stage is four.five to 28V compatible
eleven.With serial RS232 / RS485 debugging perform, but need to use our specific serial debugging cable 
12.Efficiency: clean velocity, modest overshoot ,modest monitoring mistake, reduced heat of motor and driver

Driver Model And Selection Xihu (West Lake) Dis.

Motor Type  57IV90 57IV130 57IV180
Rated power(W) 90W 130W 180W
Vector Maximum Current 16A 18A 22A
Body Length(MM) 106.2 0.five 126.2 0.five 146.2 0.five
Operation Voltage 15-50Vdc,36Vdc recommend 
Overvoltage Protection Voltage 68Vdc±2
Control Method 32 bits DSP vector FOC control technology
Pulse Limit Frequency 500KHz(factory default 200KHz)
Security Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm
Input Signal  Pulse, direction and enable differential / single-ended interface signal,
interface level 4.5-28Vdc compatible, no need external current limiting resistor
Output Signal  Alarm / in-position signal OC output, the output capacity is100mA, need external
pull-up resistor, the maximum pull up voltage is 24Vdc
Electronic Gear Ratio Default 4000 / rev, through the DIP switch or debug software setting subdivision
(200-51200)
Position Error Control Accuracy ±1 Pulse
Speed Control Accuracy  ±2 rpm
Maximum  Acceleration 100 rpm/ms

Dialing Swap Options

Pulse/Rev. SW1 SW2 SW3 SW4
Default ON ON ON ON
800 OFF ON ON ON
1600 ON OFF ON ON
3200 OFF OFF ON ON
6400 ON ON OFF ON
12800 OFF ON OFF ON
25600 ON OFF OFF ON
51200 OFF OFF OFF ON
1000 ON ON ON OFF
2000 OFF ON ON OFF
4000 ON OFF ON OFF
5000 OFF OFF ON OFF
8000 ON ON OFF OFF
10000 OFF ON OFF OFF
20000 ON OFF OFF OFF
40000 OFF OFF OFF OFF

Subdivision precision (electronic equipment ratio) :When SW1, SW2, SW3, SW4 are ON, the generate utilizes the inside default micro-step subdivision, the default internal subdivision of the driver is 400Pulse / rev, and the digital equipment ratio can also be established by the debugging software. SW5 established the motor route,when turnON, the motor turns clockwise (CW),when turn OFF, the motor turns counterclockwise(CCW). SW6 management method assortment, whenON, the motor enters the self-take a look at mode,making 1 CZPT and reverse revolution, has been recurring right up until exit self-take a look at manner, the external management sign is invalid at self check method, whenOFF, the motor exits self-test mode,then the exterior management sign is legitimate.

Mechanical Framework Dimension

 Driver mode Motor body length(mm) Driver thickness(mm) Integrated motor driver length(mm)
57IV90 76 30.two 106.two
57IV130  96 thirty.2 126.2
57IV180  116 thirty.2 149.2

Be aware : All previously mentioned is normally employed, and we can personalize according to your ask for or select the suitable model for you, make sure you tell us following parameters: recent, voltage, holding torque, body size,the software location.

Software
Suitable for all types of tiny and medium-sized automation equipments and devices. Such as: laser equipment, health care equipment, 3D printer, little and medium-sized engraving device, digital processing equipment, automated crawling gear, specific CNC machine instrument, packaging tools and robot. It is specially beneficial for users who assume reduced noise and large velocity purposes.

Packaging and delivery
one.Outer packing: CZPT export carton with necessary transport marks
two.Interior packing: Watertight packing with shock absorbing EPE and cardboard surrounded 
3.As per the consumers demands

Our services
1.Operating time : eight:00 a.m – 10:00 p.m .Any queries, make sure you inform us freely, we will be reply you asap.
2.Guide time : For samples, 2 to 5 times will be Ok. For mass generation, the direct time count on the portions you need.
three.Warrantity period of time : 18 months and Existence-long upkeep services for the product.
4.We accept goods personalize.

FAQ
Q1: How to pick the suited stepper or servo motor?
A1: There are serveral crucial products: measurement, size, keeping torque, voltage, current and so on.Right after affirm them and instructed us, we can decide on the ideal one for you.

Q2: Any other approaches to finalize the product?
A2: Confident, you can deliver us the product you are using, we can help you locate the suited a single.

Q3:How to promise the High quality of CZPT Areas?
A3: We have the integrated method for industrial components high quality handle. We have IQC (incoming quality control), IPQCS (in procedure good quality handle section), FQC (final top quality control) and OQC (out-going quality control) to management every approach of industrial components prodution.

This fall:What is the Edge of Your Areas for Market Merchandise? 
A4:one.The gain of our products is the aggressive charges, rapidly shipping and delivery and large top quality. Our
workers are accountable-oriented, friendly-oriented,and diligent-oriented. Our products are featured by strict tolerance, easy complete and extended service time.
two.Ahead of we send out the products,we examine them a lot more than three instances.

Get in touch with

 

Position Control Servo Motor Kit for Robot & CNC

Tags: